1126 with 60″ Mower 4WD ROPS HST, Loader

Type: Naturally aspirated, water cooled, indirect injection diesel

Engine HP [kW] @ RPM: 24.7 (18.4) @ 2900

Maximum Torque (in-lbs) @ RPM: 566 (64) @ 2200

Displacement (in3): 67.2

Number of Cylinders: 3

Firing Order: 1-3-2

Bore & Stroke (in): 3 x 3.2

Compression Ratio: 22:1

Low Idle RPM: 1600

High Idle RPM: 3100

Injection Pump: Denso in-line

Accelerator : Hand throttle lever w/cruise knob

Muffler: Under hood

Air Cleaner: 4″ dry

Fuel: ULSD

Fuel Tank gal (L): 6.6 (25)

POWER TAKE OFF:
Independent wet clutch

PTO Operation: Push button

Rear PTO RPM: 540

Mid PTO RPM: 2500

PTO HP [kW]: 17 (10.4)

DASH INSTRUMENTS:

SAFETY EQUIPMENT:

DRIVE TRAIN:

Transmission: HST two range

Number of Speeds: Infinite

Clutch: N/A

Brakes: Single

HYDRAULICS:

Type: Open center

Steering Pump Output gpm (L/min): 7.3 (27.7)

Implement Pump Output gpm (L/min): 3.8 (14.5)

3-Point Hitch: Cat I with telescoping stabilizers

Lift Capacity lb (kg): 1100 (500)

Optional Fitments: One

OPERATOR STATION:

FRONT AXLE:

ELECTRICAL:

Battery: 650 CCA, 52 Ah

Alternator: 55 A

Starter Capacity: 1.7 kW

Lights: Projector lamp & LED strip

Gauges: Electronic hour meter, stepper gauge for RPM

Indicator Lights: Temperature & fuel level

DIMENSIONS:

Tilt Steering: Yes & telescopic

Overall Length in (mm): 100.4 (2550)

Overall Width in (mm): 46.3 (1177)

Overall Height in (mm): 86.6 (2200)

Weight lb (kg): 1573 (715)

WHEELS & TIRES:

IND [Front/Rear]: 18×8.5-10 / 26×12-12

CAPACITIES:

Fuel Tank gal. (L): 6.6 (25)